VINTAGE STYLE VINYL DECALS GRAPHICS FITS TOYOTA PICKUPS/ 89 4x4 MODELS

Color is (dark to light brown), vintage style for models 84 to 88 4x4. Right and Left Sides graphics and hood. We use only, professional grade Vinyl Outlast it's competition. Color is brown FADED LIKE THE ORIGINAL DESIGN vintage style, pictures are only for display of the graphics actual graphics will be on a solid vinyl color not printed or faded like the originals, READ This are not intend to match the exact size and dimensions of the factory ones!!! TIP 4: USE THE WET METHOD.

You can apply most smaller decals without using water, but for large and very large stickers, this trick is a life-saver. After cleaning your surface area, wet the area again using a spray bottle and a solution of about 5% soap / 95% water. Apply the sticker while the area is still wet. This will keep it from adhering immediately and give you time to reposition if necessary. It also enables you to remove any bubbles using a squeegee or a plastic card.

The soapy water will dry in a few minutes and leave your sticker firmly affixed. TIP 5: TEND TO THE TRANSFER TAPE. Many of our stickers come with three layers. Transfer tape, the clear top layer that clings to the non-adhesive side of the sticker and holds the sticker together the sticker, the middle layer. Backing paper, the bottom layer of white paper that clings to the adhesive side of the sticker.

Before applying these types of stickers, it's important to make sure the sticker and transfer tape are pressed firmly together. To do so, apply pressure evenly across the transfer tape with a squeegee or a plastic card. This will ensure that the sticker doesn't come up with the backing paper during installation. Also, once you've applied your sticker, be sure to leave the transfer tape in place for at least 20 MINS before gently removing it.

In very cold winter months, you may need to leave the transfer tape on even longer. To speed up the process when it's cold out, you can warm the application surface using a blow dryer on low heat. Now that you know the tricks the experts use for applying stickers, you should be able to get it right every time! But just in case you want even more information, you can find step-by-step instructions and more tips at YOUTUBE. TIP 1: START WITH A CLEAN SURFACE.

Pre-wash the area where you'll be applying the sticker using either soap and water or a mixture of rubbing alcohol (70% isopropyl alcohol) and water-we recommend a 50 / 50 water / alcohol solution. After cleaning with soapy water, rinse thoroughly with water until no soap or residue remains. Do not use window-cleaning products. They may leave a residue behind, making your sticker cling less effectively. No product leaves our premises damaged, torn or wrinkled. Please do not try to come up with stories about how you didn't notice the damage, or I sent you the wrong side or that the product wouldn't stick (if you do not know how to recognize any of these issues before hand, you are not a qualified installer). I have heard every excuse in the book. I will always try to work out any problems, so please ask if you need assistance. All items damaged will be replaced at no charge. You mav be reguired to send the damaged package back.